Maintenance Free Big Skye Swing Set 2
Made by Gorilla
The main difference between the Big Skye 1 and the Big Skye 2 is the addition of a 14ft long commercial grade scoop slide retaining the heavy duty construction of the Big Skye 1 which is carried through to the Big Skye 2 with a capacity of 175lbs on each of the two belt swings suspended from ductile iron swing hangers with plastisol coated chains. The glider swing has a capacity of 70lbs per child and the wave slide has a weight capacity of 125lbs
Factory Stained & Sealed the Big Skye 2 also has Poly Coated Pine Wooden Beams resistant to rot, insect damage and decay with a manufacturers warranty for 10 years on the timber.
With a one year warranty on all other parts the Big Skye wooden swing set 2 will also give peace of mind and many years of fun and action while your children are growing up.
Big Skye Swing Set 2 activities:
- 2 play decks (5ft high 25sq ft and 7ft high 12.5 sq ft)
- 3 position swing beam 6" x 4" Poly coated as are the supporting struts
- 2 Belt Swings 175lb per belt.
- Glider Swing 70lb per per child
- Radical Ride Tube Slide
- Radical Wave Slide 125lb weight capacity
- 14ft Commercial Grade Scoop Slide
- Rock Wall with Climbing rope
- Safety Step Ladder
- Climbing Rope Ladder
- Built in Picnic Table
- Sandbox with mesh cover
- Safety Pads & Handles
- Telescope
- Periscope
- Steering Wheel
- Tic Tac Toe Panel
The upper decks, dormers and chimney are tongued and grooved supported by 4" x " 4 framing.
Installation: Do-it-Yourself (DIY) using the included Step by Step instructions approximately 8 to 12 hours (With a helper it's much easier to assemble)
Installation Dimensions 21ft Long x 26ft Deep x 12.5ft High (The overall dimensions of length and depth are increased by 3ft and 5ft respectively compared to the Big Skye 1 while the height remains the same)

Play Perimeter: A 6ft wide safe area all around as a minimum but swings should have the equivalent of the swing height to the front and rear-just measure from the swing beam to the ground for the vertical height and project that measurement to the front and rear and then add 6ft and that is the Play Perimeter.
Fall Height: Although falls are unlikely it would be prudent to have a shock absorbing surface to protect players from scrapes and bruises. Fall Height for this model is 5ft and 7ft Protection is available in various forms depending on your play surface and budget. For information on the different types of shock absorbing playground surfaces available Click Here
Trackbacks
- CC Skye Naomi Hobo …
- Top 10 Sandbox Games …
- Swing Dvd …
- Swing Mat …